Cast Iron Soil & Waste
Choose from a variety of soil pipes and fittings to transport soil & waste through the drainage system and into the drainage network.
Search Filters
Refine:
Your selection
Branch 150mm x 150mm x 87.5°
The Timesaver soil single branch enables the connection of pipes at a variety of sizes, combinations and angles which will suit your project needs.
£271.31
Incl. VAT
Branch 150mm x 100mm x 87.5°
The Timesaver soil single branch enables the connection of pipes at a variety of sizes, combinations and angles which will suit your project needs.
£207.58
Incl. VAT
Branch 150mm x 150mm x 45°
The Timesaver soil single branch enables the connection of pipes at a variety of sizes, combinations and angles which will suit your project needs.
£271.31
Incl. VAT
Branch 150mm x 100mm x 45°
The Timesaver soil single branch enables the connection of pipes at a variety of sizes, combinations and angles which will suit your project needs.
£304.56
Incl. VAT
Pipe 150mm x 3M
Timesaver soil cast iron double spigot pipes, are manufactured using the De Lavaud process. The spun pipes are placed and rotated in a heat treatment furnace at 950° C and then gradually cooled again. This process considerably improves the mechanical properties of the cast iron providing greater crush and impact resistance and makes then easier to cut on site.
£489.01
Incl. VAT
Two-Piece Coupling 150mm
Timesaver soil ductile iron two-part couplings for connecting spigot ended cast iron pipes and fittings which includes an EPDM gasket as standard.
£83.57
Incl. VAT
Eared Push-Fit Heritage Coupling 150mm
The Timesaver soil cast iron push-fit Heritage couplings consist of two EPDM gaskets, connecting spigot ended pipes and fittings to BS 416 part 2 for traditional soil systems.
£90.09
Incl. VAT
Uneared Push-Fit Heritage Coupling 150mm
The Timesaver soil cast iron push-fit Heritage couplings consist of two EPDM gaskets, connecting spigot ended pipes and fittings to BS 416 part 2 for traditional soil systems.
£85.31
Incl. VAT
Eared Push-Fit Heritage Slip Coupling 150mm
Heritage slip socket with fixing ears with a reduced central register for retro fitting when pipework already installed
£100.27
Incl. VAT
Short Radius Bend 150mm x 87.5°
The Timesaver soil cast iron short radius bends allow a change of direction of the transported fluid.
£126.44
Incl. VAT
Short Radius Bend 150mm x 45°
The Timesaver soil cast iron short radius bends allow a change of direction of the transported fluid.
£126.44
Incl. VAT
Long Radius Bend 150mm x 22.5°
The Timesaver soil cast iron long radius bends allow a change of direction of the transported fluid.
£275.85
Incl. VAT
Long Radius Bend 150mm x 87.5°
The Timesaver soil cast iron long radius bends allow a change of direction of the transported fluid.
£249.99
Incl. VAT
Long Radius Bend with Access 150mm x 87.5°
The Timesaver soil cast iron long radius bends allow a change of direction of the transported fluid. An opening is provided protected by a door to allow access to the system to clear any debris or blockage.
£341.23
Incl. VAT
Short Radius Bend with Access 150mm x 45°
The Timesaver soil cast iron short radius bends allow a change of direction of the transported fluid. An opening is provided protected by a door to allow access to the system to clear any debris or blockage.
£212.70
Incl. VAT
Short Radius Bend with Access 150mm x 87.5°
The Timesaver soil cast iron short radius bends allow a change of direction of the transported fluid. An opening is provided protected by a door to allow access to the system to clear any debris or blockage.
£212.70
Incl. VAT
Access Pipe with Rectangular Door 150mm
The Timesaver soil access pipe allows you to enter the network. The access pipe is made up of a cast iron body and rectangular cover as well as an EPDM elastomer seal. The access pipe with rectangular door has a wider opening and therefore is often used at the base of the stack in basements / car parks to maximise opportunity for cleaning.
£390.20
Incl. VAT
Access Pipe with Round Door 150mm
The Timesaver soil access pipe allows you to enter the network. The access pipe is made up of a cast iron body and oval door cover as well as an EPDM elastomer seal. The access pipe combines reliability with simplicity and safety of use:
£215.21
Incl. VAT
Branch with Access 150mm x 100mm x 45°
The Timesaver soil single branch enables the connection of pipes at a variety of sizes, combinations, angles which will suit your project needs. These branches have the added feature of a access point.
£365.50
Incl. VAT
Branch with Access 150mm x 150mm x 87.5°
The Timesaver soil single branch enables the connection of pipes at a variety of sizes, combinations, angles which will suit your project needs. These branches have the added feature of a access point.
£401.27
Incl. VAT
Branch with Access 150mm x 100mm x 87.5°
The Timesaver soil single branch enables the connection of pipes at a variety of sizes, combinations, angles which will suit your project needs. These branches have the added feature of a access point.
£337.25
Incl. VAT
Boss Pipe x 150mm
The Timesaver soil single boss pipes enable you to connect a 50mm waste pipe and come in different confirurations from single, double oppossed or 90 degree options.
£206.38
Incl. VAT
Taper Pipe 150mm x 100mm
The taper pipes enable you to connect different size pipes or fittings therefore allowing you to design the system in different sizes to suit the flow requirements.
£173.87
Incl. VAT
Double Opposed Boss Pipe x 150mm
The Timesaver soil single boss pipes enable you to connect a 50mm waste pipe and come in different confirurations from single, double oppossed or 90 degree options.
£233.65
Incl. VAT
Blank End 150mm
The range of blank ends enable you to cap the end of a pipe run.
£31.08
Incl. VAT
Blank End Push-fit Connector 150mm
Timesaver soil cast iron blank ends that allow connection for various waste pipe diameters through various connecting options.
£56.36
Incl. VAT
P Trap with Access 150mm
The P Traps enable a stench stop and come plain or with a heel access.
£336.17
Incl. VAT
Bracket Wall Fixing 150mm
Timesaver soil two-part ductile iron brackets are for restraining vertical or horizontal cast iron pipe and fitting components to structural elements eg, walls and floors.
£40.42
Incl. VAT
Continuity Clip 150mm
The Timesaver electrical continuity clip fits a standard Timesaver coupling. Only one electrical continuity clip is required per coupling. Note: The electrical continuity test should be carried out in accordance with BS 6089
£116.37
Incl. VAT