Cast Iron Soil & Waste
Choose from a variety of soil pipes and fittings to transport soil & waste through the drainage system and into the drainage network.
Search Filters
Your selection
Offset 75mm x 115mm
These pipe offset will enable you to connect a pipe run where it is not possible to keep the run in a straight line. They come in a range of sizes and offset dimensions.
£83.00
Incl. VAT
Offset 75mm x 75mm
The pipe offset will enable you to connect a pipe run where it is not possible to keep the run in a straight line. They come in a range of sizes and offset dimensions.
£75.52
Incl. VAT
Offset 75mm x 150mm
The pipe offset will enable you to connect a pipe run where it is not possible to keep the run in a straight line. They come in a range of sizes and offset dimensions.
£97.53
Incl. VAT
Wall Spacer Plate 75mm
Timesaver Heritage Cast Iron Wall Spacer Plate 75mm
£10.47
Incl. VAT
Branch 75mm x 75mm x 45°
The Timesaver soil single branch enables the connection of pipes at a variety of sizes, combinations and angles which will suit your project needs.
£106.33
Incl. VAT
Branch 75mm x 50mm x 45°
The Timesaver soil single branch enables the connection of pipes at a variety of sizes, combinations and angles which will suit your project needs.
£98.58
Incl. VAT
Branch 75mm x 75mm x 87.5°
The Timesaver soil single branch enables the connection of pipes at a variety of sizes, combinations and angles which will suit your project needs.
£87.13
Incl. VAT
Branch 75mm x 50mm x 87.5°
The Timesaver soil single branch enables the connection of pipes at a variety of sizes, combinations and angles which will suit your project needs.
£87.13
Incl. VAT
Heritage Pipe 75mm x 1.8M
Timesaver soil cast iron double spigot pipes 6ft (1.8m) in length specifically manufactured for the refurbishment market, for traditional soil stacks installed on the outside of buildings.
£126.65
Incl. VAT
Pipe 75mm x 3M
Timesaver soil cast iron double spigot pipes, are manufactured using the De Lavaud process. The spun pipes are placed and rotated in a heat treatment furnace at 950° C and then gradually cooled again. This process considerably improves the mechanical properties of the cast iron providing greater crush and impact resistance and makes then easier to cut on site.
£193.75
Incl. VAT
Two-Piece Coupling 75mm
Timesaver soil ductile iron two-part couplings for connecting spigot ended cast iron pipes and fittings which includes an EPDM gasket as standard.
£32.08
Incl. VAT
Eared Push-Fit Heritage Coupling 75mm
The Timesaver soil cast iron push-fit Heritage couplings consist of two EPDM gaskets, connecting spigot ended pipes and fittings to BS 416 part 2 for traditional soil systems.
£52.00
Incl. VAT
Uneared Push-Fit Heritage Coupling 75mm
The Timesaver soil cast iron push-fit Heritage couplings consist of two EPDM gaskets, connecting spigot ended pipes and fittings to BS 416 part 2 for traditional soil systems.
£50.48
Incl. VAT
Eared Push-Fit Heritage Slip Coupling 75mm
Heritage slip socket with fixing ears with a reduced central register for retro fitting when pipework already installed
£61.87
Incl. VAT
Short Radius Bend 75mm x 87.5°
The Timesaver soil cast iron short radius bends allow a change of direction of the transported fluid.
£57.84
Incl. VAT
Short Radius Bend 75mm x 45°
The Timesaver soil cast iron short radius bends allow a change of direction of the transported fluid.
£57.84
Incl. VAT
Long Radius Bend 75mm x 87.5°
The Timesaver soil cast iron long radius bends allow a change of direction of the transported fluid.
£116.06
Incl. VAT
Long Radius Bend with Access 75mm x 87.5°
The Timesaver soil cast iron long radius bends allow a change of direction of the transported fluid. An opening is provided protected by a door to allow access to the system to clear any debris or blockage.
£171.50
Incl. VAT
Short Radius Bend with Access 75mm x 87.5°
The Timesaver soil cast iron short radius bends allow a change of direction of the transported fluid. An opening is provided protected by a door to allow access to the system to clear any debris or blockage.
£136.77
Incl. VAT
Short Radius Bend with Access 75mm x 45°
The Timesaver soil cast iron short radius bends allow a change of direction of the transported fluid. An opening is provided protected by a door to allow access to the system to clear any debris or blockage.
£136.77
Incl. VAT
Access Pipe with Round Door 75mm
The Timesaver soil access pipe allows you to enter the network. The access pipe is made up of a cast iron body and oval door cover as well as an EPDM elastomer seal. The access pipe combines reliability with simplicity and safety of use:
£123.10
Incl. VAT
Branch with Access 75mm x 50mm x 87.5°
The Timesaver soil single branch enables the connection of pipes at a variety of sizes, combinations, angles which will suit your project needs. These branches have the added feature of a access point.
£167.66
Incl. VAT
Branch with Access 75mm x 75mm x 87.5°
The Timesaver soil single branch enables the connection of pipes at a variety of sizes, combinations, angles which will suit your project needs. These branches have the added feature of a access point.
£167.66
Incl. VAT
Boss Pipe Drilled & Tapped 75mm x 2"BSP
The Timesaver soil single boss pipes enable you to connect a 50mm waste pipe and come in different confirurations from single, double oppossed or 90 degree options.
£105.90
Incl. VAT
Taper Pipe 75mm x 50mm
The taper pipes enable you to connect different size pipes or fittings therefore allowing you to design the system in different sizes to suit the flow requirements.
£70.37
Incl. VAT
Blank End 75mm
The range of blank ends enable you to cap the end of a pipe run.
£22.20
Incl. VAT
Blank End Push-fit Connector 75mm
Timesaver soil cast iron blank ends that allow connection for various waste pipe diameters through various connecting options.
£43.72
Incl. VAT
P Trap with Access 75mm
The P Traps enable a stench stop and come plain or with a heel access.
£173.74
Incl. VAT
Bracket Wall Fixing 75mm
Timesaver soil two-part ductile iron brackets are for restraining vertical or horizontal cast iron pipe and fitting components to structural elements eg, walls and floors.
£21.30
Incl. VAT