Next Day Delivery *
Call us: 0330 0244884
In Stock Matte (Primed)
Technical line drawing
Classical Rainwater

Offset 100mm x 115mm

£71.17(Incl. VAT)
  • Solid Cast Iron construction
  • Matte Black (Primed) finish
  • Made in the UK by Pam Building UK
1
Spend £428.83 more for free delivery
Secure checkout
In stock — ready to dispatch
Dispatched the same working day on orders placed before 12:30pm
Next-day delivery available

Made in the UK

97% Recycled Content Fully recyclable
Not sure on sizing? Try the Rainwater Flow Calculator

Complete Your System

Classical Rainwater

About this product

Cast iron circular pipe offset fittings makes it possible to connect the vertical pipe system with the Classical cast iron gutter system horizontally draining the roof area on a building.

  • Solid Cast Iron construction
  • Matte Black (Primed) finish
  • Made in the UK by Pam Building UK

Technical

Specifications & dimensions

Dimensions & weight

Dimensions & weight
Nominal Diameter100mm
Weight4.1kg

Specifications

Specifications
Unit of MeasurePC
ManufacturerPam Building UK
Product Code191961
RangeClassical Rainwater
Product FamilyPipe Offset
MaterialCast Iron
CoatingMatte Black (Primed)
Recycled Content97% Fully recyclable

Dimensional drawing

Technical line drawing
Nominal diameter
100mm
Dim A
235mm

Fitting guide

Installation overview

A summary of the typical steps for a Classical Rainwater run. Always follow the manufacturer's instructions for your specific installation.

  1. 1

    Set the fall to the outlet

    Mark a slight gradient along the fascia toward the outlet position so water runs freely to the downpipe.

  2. 2

    Fix the brackets

    Fit the brackets to the marked line — around two per 1.83m length, and no more than 900mm apart, with a bracket near each joint.

  3. 3

    Cut and drill to size

    Cut lengths to size with a hacksaw. Where fixing through the gutter, drill 8mm holes about 20mm in from the spigot.

  4. 4

    Joint the system

    Connect lengths with union clips, sealant and setscrews, checking each spigot-and-socket joint is fully seated.

  5. 5

    Fit the downpipe

    Fix eared pipes back to the wall directly, or use spacer plates where the pipe needs to stand off the surface.

  6. 6

    Prepare and overpaint primed products

    The black primer finish is for transport only. Overpaint primed items with a suitable top coat before or after installation.

Common questions

Frequently asked questions

What lengths do the gutters and downpipes come in?

Gutters and downpipes are supplied in 1.83m lengths. Pipe barrels are 1.75m.

Do I need any special bracketry?

Yes. Classical Rainwater gutters and downpipes are fixed using bracketry from the same range.

How is the system jointed?

Lengths connect with a spigot-and-socket joint, held with union clips, sealant and setscrews.

What is the difference between the primed and coated finishes?

Primed is a black water-based primer intended for transport and should be overpainted. Coated is a factory-applied gloss finish.

Can I install cast iron in a coastal area?

Within about 5 miles of the sea the harsher conditions mean extra finishing and ongoing maintenance are recommended.

50% OFF

We value your privacy

We use cookies to enhance your browsing experience, serve personalized content, and analyze our traffic. By clicking "Accept", you consent to our use of cookies.