Continuity Clip 100mm

Access Pipe with Round Door 100mm

The Timesaver soil access pipe allows you to enter the network. The access pipe is made up of a cast iron body and oval door cover as well as an EPDM elastomer seal. The access pipe combines reliability with simplicity and safety of use:

Branch 100mm x 100mm x 45°

The Timesaver soil single branch enables the connection of pipes at a variety of sizes, combinations and angles which will suit your project needs.

Access Pipe with Rectangular Door 100mm

The Timesaver soil access pipe allows you to enter the network. The access pipe is made up of a cast iron body and rectangular cover as well as an EPDM elastomer seal. The access pipe with rectangular door has a wider opening and therefore is often used at the base of the stack in basements / car parks to maximise opportunity for cleaning.

Branch with Access 100mm x 50mm x 87.5°

The Timesaver soil single branch enables the connection of pipes at a variety of sizes, combinations, angles which will suit your project needs. These branches have the added feature of a access point.

Short Radius Bend 100mm x 67.5°

The Timesaver soil cast iron short radius bends allow a change of direction of the transported fluid.

Double Opposed Boss Pipe x 100mm

The Timesaver soil single boss pipes enable you to connect a 50mm waste pipe and come in different confirurations from single, double oppossed or 90 degree options.

Two-Piece Coupling 100mm

Timesaver soil ductile iron two-part couplings for connecting spigot ended cast iron pipes and fittings which includes an EPDM gasket as standard.

Pipe 100mm x 3M

Timesaver soil cast iron double spigot pipes, are manufactured using the De Lavaud process. The spun pipes are placed and rotated in a heat treatment furnace at 950° C and then gradually cooled again. This process considerably improves the mechanical properties of the cast iron providing greater crush and impact resistance and makes then easier to cut on site.

Short Radius Bend with Access 100mm x 87.5°

The Timesaver soil cast iron short radius bends allow a change of direction of the transported fluid. An opening is provided protected by a door to allow access to the system to clear any debris or blockage.

Long Tail Bend 100mm x 87.5°

The Timesaver soil cast iron long tail soil bends allow a change of direction of the transported fluid.

Long Radius Bend 100mm x 22.5°

The Timesaver soil cast iron long radius bends allow a change of direction of the transported fluid.

Taper Pipe 100mm x 75mm

The taper pipes enable you to connect different size pipes or fittings therefore allowing you to design the system in different sizes to suit the flow requirements.

Blank End with 2"BSP 100mm

Timesaver soil cast iron blank ends that allow connection for various waste pipe diameters through various connecting options.

Double Branch 100mm x 100mm x 45°

The Timesaver soil double branch enables the connection of pipes at a variety of sizes, combinations, angles which will suit your project needs. These branches have the added feature of a access point and a swept radius.

Long Radius Bend with Side Access 100mm x 87.5°

The Timesaver soil cast iron long radius bends allow a change of direction of the transported fluid. An opening is provided protected by a door to allow access to the system to clear any debris or blockage.

Currently out of stock, we will confirm lead time

Eared Push-Fit Heritage Coupling 100mm

The Timesaver soil cast iron push-fit Heritage couplings consist of two EPDM gaskets, connecting spigot ended pipes and fittings to BS 416 part 2 for traditional soil systems.

Long Tail Branch 100mm x 100mm x 87.5°

Timesaver soil cast iron double branch with a swept radius to maximise the lateral discharge flow from a WC into the main vertical soil stack in accordance with BS EN 12056 part2.

Bracket Wall Fixing 100mm

Timesaver soil two-part ductile iron brackets are for restraining vertical or horizontal cast iron pipe and fitting components to structural elements eg, walls and floors.

Boss Pipe Drilled & Tapped 100mm x 2"BSP

The Timesaver soil single boss pipes enable you to connect a 50mm waste pipe and come in different confirurations from single, double oppossed or 90 degree options.

Branch Boss Right 100mm x 87.5°

The Timesaver soil branch has a boss on the right to enable connection of a 50mm pipe.

Offset 100mm x 150mm

The pipe offset will enable you to connect a pipe run where it is not possible to keep the run in a straight line. They come in a range of sizes and offset dimensions.

P Trap with Access 100mm

The P Traps enable a stench stop and come plain or with a heel access.

Spacer Plate for 100mm Socket

Rainwater Cast Iron Spacer Plate Round 100mm (Primed and Plus)